60 mL Dropper Bottle
A 60 mL dropper bottle with a short, wide body: 57.8 mm across and 69.9 mm high, in PET. Used for supplement drops, dietary supplements and medicated drops, with the dropper and closure agreed per project.
Specification
The body is 57.8 mm across and 69.9 mm high. For medical and supplement fills the closure is settled first: the neck, the dropper and any child-resistant requirement decide what goes into the drawing, and the 60 mL body stays the same.
| Product name | 60 mL Dropper Bottle |
|---|---|
| Capacity | 60 mL |
| Bottle dimensions | 57.8 (φ) × 69.9 (H) mm, tolerance ±1.0 mm |
| Material | PET (as marked on the product photography) |
| Colour | White body with an orange dip, as shown; other colours per project |
| Decoration | Label or print — colour and logo options per project |
| Closure | Dropper assembly, supplied per project |
| Applications | Supplement drops, dietary supplements and medicated drops |
Where it is used
- Supplement drops (vitamin and mineral formats)
- Dietary supplement drops
- Medicated drops, closure per project
Dimensions are taken from the dimension chart; the moulded part runs to a ±1.0 mm tolerance. The dropper, cap and label are quoted together with the bottle, and a tolerance drawing is issued with the quotation.
Body, dimensions and two empty frames
The white-and-orange body from the front and lying down, plus the dimension chart in two versions. The last two frames are kept empty — one for the dropper and cap, one for your label artwork or the packed carton.
Supplement drops and medicated drops
Medical and supplement fills are quoted from the closure backwards — the dropper and any child-resistant requirement decide the neck before the body is confirmed.
Drops, dosed by the pipette
The dropper assembly is matched to the neck so a daily dose comes out in drops rather than a pour, and the label can carry the dose instruction.
Closure agreed first
If the fill needs a child-resistant or tamper-evident closure, say so at the enquiry. The neck and the dropper are then confirmed on the drawing.
Label panel for the batch
The flat panel between the shoulder and the base takes a label with the batch and the dose; artwork is proofed before the first run.
A wide body, a short neck, a dropper
The bottle is short and wide, so it sits stable on a shelf while the dropper reaches the bottom of the fill.
57.8 mm across, 69.9 mm high
A low, rounded body with a soft shoulder. The white-and-orange split is a decoration option, not a separate mould.
A short, wide opening
The neck is short and wide, which leaves room for a dropper assembly and for filling with a small nozzle.
Dropper assembly per project
The dropper and cap are matched to the neck and quoted with the bottle. Send the dose you need per squeeze and we confirm the pipette.
Colour and logo, set with the order
The body takes a colour split and a logo, and the run stays small while the line is tested.
White and orange as standard
The sample is white with an orange dip and a white neck. Tell us the two colours you want and whether the dropper cap should match; other shades are quoted per project.
Label or print
The body has a flat label panel between the shoulder and the base. Send the artwork and we confirm the decoration method and the print area.
This bottle, answered
What is this bottle used for?
Supplement drops, dietary supplements and medicated drops. It is a 60 mL body at 57.8 mm across and 69.9 mm high, with the dropper and closure quoted with the bottle.
Does the bottle come with a dropper?
Yes — the dropper assembly is matched to the neck and quoted with the bottle. The photographs here show the body only; the empty frame in the gallery is reserved for a dropper photo.
Can it take a child-resistant cap?
Closures are agreed per project. Tell us at the enquiry whether you need a child-resistant or tamper-evident closure, and we confirm the neck and the cap on the drawing.
What are the exact dimensions?
57.8 mm across the body and 69.9 mm high, both to a ±1.0 mm moulded tolerance. The 60 mL capacity is the nominal fill.
Which material is it?
PET, as marked on the product photography. If the fill needs a different resin, tell us and we quote it against the project.
Can we print a batch code or a logo?
Label or print. The flat panel between the shoulder and the base takes the label; send the artwork and we confirm the method and the print area.
