What the plant can actually do with a bottle
Four things decide whether a bottle project works: the mould, the resin, the decoration and the shipping plan. Here is how each is handled in Changping.
Manufacturing capability
Mould making and sampling
In-house tool design and maintenance: a sketch or a competitor sample becomes a 3D model, then a mould, then a pilot shot.
- Stock tools for the three bottle families
- Neck finish change without a new body
- Pilot run before mass production
Moulding
Injection and blow moulding in PET, HDPE, PP, PS and LDPE, with automated take-off and in-line dimensional checks.
- Capacities from 30 mL to 2.5 L
- Food-grade and cosmetic-grade resins
- Colour matching to Pantone
Decoration
Silkscreen, hot stamping, spray coating, labelling and electroplating — all applied on the same site as moulding.
- Gold, silver and matte metallising
- Frosted and soft-touch coatings
- Multi-colour print registration
Quality and export
Dimensional, leak and appearance checks before packing; palletised cartons with FOB Shenzhen or Hong Kong, CIF and EXW terms.
- Batch records kept for traceability
- SGS or BV inspection welcome
- English export documentation
Five stages from brief to pallet
Each stage leaves a record — drawings, sample approvals, inspection results and packing lists.
- 01
Brief & selection
Fill, capacity, neck finish and cap are fixed against a stock or new body.
- 02
Sampling
Stock formats in about a week; new moulds after drawing approval.
- 03
Moulding
Injection or blow moulding, with in-line checks.
- 04
Decoration
Print, stamping, coating, labelling or plating.
- 05
Inspection & export
AQL sampling, palletised cartons, FOB/CIF/EXW.
What we can put in writing
| Area | Document |
|---|---|
| Quality management | ISO 9001:2015 |
| Material | Resin certificate, food-contact statement |
| Testing | Dimensional, leak and appearance reports |
| Inspection | SGS / BV |