60 mL Dropper Bottle
A 60 mL dropper bottle with a short, wide body: 57.8 mm across and 69.9 mm high, in PET. Used for food flavour drops, seasoning oils and edible essential oils, with the dropper and label quoted with the bottle.
Specification
The body is 57.8 mm across and 69.9 mm high — short enough to sit in a kitchen drawer, wide enough to stay upright while the pipette is squeezed. Food projects are quoted with the closure and the label so the fill, the cap and the print are agreed together.
| Product name | 60 mL Dropper Bottle |
|---|---|
| Capacity | 60 mL |
| Bottle dimensions | 57.8 (φ) × 69.9 (H) mm, tolerance ±1.0 mm |
| Material | PET (as marked on the product photography) |
| Colour | White body with an orange dip, as shown; other colours per project |
| Decoration | Label or print — colour and logo options per project |
| Closure | Dropper assembly, supplied per project |
| Applications | Food flavour drops, seasoning oils and edible essential oils |
Where it is used
- Food flavour drops and concentrates
- Seasoning oils and finishing oils
- Edible essential oils and samplers
Dimensions are taken from the dimension chart; the moulded part runs to a ±1.0 mm tolerance. The dropper, cap and label are quoted together with the bottle, and a tolerance drawing is issued with the quotation.
Body, dimensions and two empty frames
The white-and-orange body from the front and lying down, plus the dimension chart in two versions. The last two frames are kept empty — one for the dropper and cap, one for your label artwork or the packed carton.
Flavour drops, seasoning oils, edible oils
Food fills put the emphasis on the label and on how cleanly the oil leaves the pipette — both are agreed with the bottle, not after it.
Drops for a measured recipe
A flavour concentrate comes out by the drop, so the pack can carry a recipe or a dosing instruction on the label.
Oil in a stable body
A 60 mL fill of finishing oil sits low in the wide body; the bottle stays upright on a counter while the pipette is used.
A small format for trialling
The same body works as a sampler for a new oil or flavour, with a label that carries the batch and the fill date.
A wide body, a short neck, a dropper
The bottle is short and wide, so it sits stable on a shelf while the dropper reaches the bottom of the fill.
57.8 mm across, 69.9 mm high
A low, rounded body with a soft shoulder. The white-and-orange split is a decoration option, not a separate mould.
A short, wide opening
The neck is short and wide, which leaves room for a dropper assembly and for filling with a small nozzle.
Dropper assembly per project
The dropper and cap are matched to the neck and quoted with the bottle. Send the dose you need per squeeze and we confirm the pipette.
Colour and logo, set with the order
The body takes a colour split and a logo, and the run stays small while the line is tested.
White and orange as standard
The sample is white with an orange dip and a white neck. Tell us the two colours you want and whether the dropper cap should match; other shades are quoted per project.
Label or print
The body has a flat label panel between the shoulder and the base. Send the artwork and we confirm the decoration method and the print area.
This bottle, answered
What is this bottle used for?
Food flavour drops, seasoning oils and edible essential oils. It is a 60 mL body at 57.8 mm across and 69.9 mm high, with the dropper and label quoted with the bottle.
Does the bottle come with a dropper?
Yes — the dropper assembly is matched to the neck and quoted with the bottle. The photographs here show the body only; the empty frame in the gallery is reserved for a dropper photo.
What are the exact dimensions?
57.8 mm across the body and 69.9 mm high, both to a ±1.0 mm moulded tolerance. The 60 mL capacity is the nominal fill.
Which material is it?
PET, as marked on the product photography. For food-contact fills, tell us the product and the market at the enquiry and we confirm the grade and the paperwork with the quotation.
Can it take a hot fill?
We do not quote a temperature rating for this item. Tell us the filling temperature and the process at the enquiry and we confirm the material against it.
Can we put our recipe or logo on it?
Label or print. The flat panel between the shoulder and the base takes a label; send the artwork and we confirm the method and the print area.
