60 mL Dropper Bottle
A 60 mL dropper bottle with a short, wide body: 57.8 mm across and 69.9 mm high, in PET, white with an orange dip as shown. Filled with serums, essential-oil skincare and face oil blends, with the dropper and label quoted with the bottle.
Specification
The body is 57.8 mm across and 69.9 mm high — short and wide, so it stands steady on a shelf while the pipette reaches the bottom of the fill. Cosmetic lines usually pick this size for a month of drops: the wall and the neck stay the same whatever colour the body runs in.
| Product name | 60 mL Dropper Bottle |
|---|---|
| Capacity | 60 mL |
| Bottle dimensions | 57.8 (φ) × 69.9 (H) mm, tolerance ±1.0 mm |
| Material | PET (as marked on the product photography) |
| Colour | White body with an orange dip, as shown; other colours per project |
| Decoration | Label or print — colour and logo options per project |
| Closure | Dropper assembly, supplied per project |
| Applications | Serums, essential-oil skincare and face oil blends |
Where it is used
- Serums and serum concentrates
- Essential-oil skincare and face oil blends
- Sample and travel sizes
Dimensions are taken from the dimension chart; the moulded part runs to a ±1.0 mm tolerance. The dropper, cap and label are quoted together with the bottle, and a tolerance drawing is issued with the quotation.
Body, dimensions and two empty frames
The white-and-orange body from the front and lying down, plus the dimension chart in two versions. The last two frames are kept empty — one for the dropper and cap, one for your label artwork or the packed carton.
Serums, face oils and oil blends
Cosmetic fills are measured in drops, so the bottle is judged on how the dropper works and how the bottle reads on a bathroom shelf.
A measured drop, not a pour
The dropper assembly is matched to the neck, so a serum or concentrate comes out in drops and the fill lasts the stated number of uses.
Short body, heavy fill
A 60 mL fill of oil sits low in the wide body, which keeps the bottle stable while the pipette is squeezed one-handed.
One body, several lines
The same mould runs across a serum line, an oil line and a travel size; only the colour split and the label change.
A wide body, a short neck, a dropper
The bottle is short and wide, so it sits stable on a shelf while the dropper reaches the bottom of the fill.
57.8 mm across, 69.9 mm high
A low, rounded body with a soft shoulder. The white-and-orange split is a decoration option, not a separate mould.
A short, wide opening
The neck is short and wide, which leaves room for a dropper assembly and for filling with a small nozzle.
Dropper assembly per project
The dropper and cap are matched to the neck and quoted with the bottle. Send the dose you need per squeeze and we confirm the pipette.
Colour and logo, set with the order
The body takes a colour split and a logo, and the run stays small while the line is tested.
White and orange as standard
The sample is white with an orange dip and a white neck. Tell us the two colours you want and whether the dropper cap should match; other shades are quoted per project.
Label or print
The body has a flat label panel between the shoulder and the base. Send the artwork and we confirm the decoration method and the print area.
This bottle, answered
What is this bottle used for?
Serums, essential-oil skincare and face oil blends. It is a 60 mL body at 57.8 mm across and 69.9 mm high, with a dropper assembly quoted with the bottle.
Does the bottle come with a dropper?
Yes — the dropper assembly and cap are matched to the neck and quoted with the bottle. The photographs here show the body only; the empty frame in the gallery is reserved for a dropper photo.
What are the exact dimensions?
57.8 mm across the body and 69.9 mm high, both to a ±1.0 mm moulded tolerance. The 60 mL capacity is the nominal fill.
Which material is it?
PET, as marked on the product photography. If your fill needs a different resin, tell us at the enquiry and we quote it.
Can the body carry two colours?
Yes — the sample runs white with an orange dip and a white neck. Give us the two colours and whether the dropper cap should match.
Can we put our logo on it?
Label or print. The flat panel between the shoulder and the base takes a label; send the artwork and we confirm the method and the print area.
