Conical Bottle
A PET bottle that is broad at the base and narrows all the way up to a small neck — a cone in profile, with a ribbed screw cap. The weight sits low, so a tall slim bottle still stands steady on a shelf. White or black, with colour and logo options and a low minimum order.
How the bottle is built
The body runs straight up from a wide base and tapers the whole way to the shoulder, which leaves a narrow neck and a small opening. A ribbed screw cap closes it. The wide base takes the weight, so the tall cone shape stands on its own without a separate foot.
| Product name | Conical Bottle |
|---|---|
| Material | PET |
| Body | Tapered cone profile, wide base, narrow shoulder |
| Neck | Narrow neck, small opening |
| Closure | Ribbed screw cap |
| Colours | White and black as shown; other colours per project |
| Decoration | Silkscreen, hot stamping or label — logo per project |
| Minimum order | Low MOQ, confirmed per project with the decoration |
Where it is used
- Cosmetic lotions and gels
- Household care liquids
- Sampler and travel sizes
Capacity, neck finish and bottle weight are fixed per project and issued on the drawing with the quotation — send us the fill volume and the drawing follows.
Standing, open, and lying down
The white bottle photographed standing, with the cap set beside the neck, and lying down; the black bottle standing and lying down. The last frame is kept empty for your label artwork or the packed carton.
The same cone in white or black
Both colours run on the same shape and the same cap, so one order can carry the white and the black version of the bottle.
A wide base, a small opening
The taper does two things: it keeps the bottle standing and it narrows the opening to a controlled pour.
Weight where it is needed
The diameter is at the bottom, so the centre of gravity stays low and the bottle sits flat on a shelf or a counter without a separate stand.
A cone, not a cylinder
The wall narrows steadily from base to shoulder. It is a different profile from the straight-sided bottles in the range, and it reads as one shape in a row.
Ribbed screw cap
A ribbed screw cap closes the narrow neck, with the ribs giving grip. Caps are matched to the neck finish before the first run.
Colour and logo are part of the order
White and black both take colour matching and a logo, and the run stays small while you test the market.
White or black as standard
Both samples are opaque. Tell us the body colour you want and whether the cap should match it; other shades are quoted per project.
Printed, hot stamped or labelled
The taper leaves a tall panel for a label or a print. Send the artwork and we confirm the method and the print area on the cone.
This bottle, answered
What shape is the bottle?
A cone: widest at the base, tapering up to a narrow shoulder and a small neck. It stands on its own base, without a separate foot.
Is the body PET?
Yes, the body is PET, supplied in white or black. The ribbed screw cap comes fitted.
Which cap fits?
The ribbed screw cap shown. The neck finish is confirmed with the drawing, so tell us if you plan to use your own cap.
Which colours can I order?
White and black as shown. Other body colours and cap combinations are quoted per project.
Can our logo go on it?
Yes — silkscreen, hot stamping or a label, depending on the artwork. Send the logo file and we confirm the method and the print area.
What is the minimum order?
Low MOQ, so the bottle can be tested before a full run. The figure is confirmed per project, because it moves with the colour and the decoration you choose.
What capacity is it?
Capacity and neck finish are fixed per project, since the bottle is quoted against your fill. Send the volume and we return the drawing with those figures on it.
