60 mL Liquid Bottle
A 60 mL PET liquid bottle at 15±2 g, in clear or amber, with a 27 mm neck and a white tamper-evident cap with inner plug. Used for liquid flavours and fragrances and sample volumes, and decorated with a body label.
Specification
The body measures 40 mm across and stands 102 mm high, on a 27 mm neck, with a moulded scale up the side. It comes in clear or amber — the amber wall cuts light for fragrance and flavour fills — and the closure is a white tamper-evident cap with an inner plug.
| Product name | 60 mL Liquid Bottle |
|---|---|
| Capacity | 60 mL |
| Weight | 15 ± 2 g |
| Neck size | 27 mm |
| Bottle dimensions | 40 (φ) × 102 (H) mm |
| Material | PET |
| Colour | Clear / amber |
| Decoration | Labelling |
| Temperature resistance | ≤ 55 °C |
| Compatible cap | White tamper-evident cap with inner plug |
Where it is used
- Liquid flavours and fragrances
- Samples
Weight is quoted as 15 ± 2 g — the tolerance covers normal variation across a production run. Dimensions are the moulded figures for this bottle; a tolerance drawing is issued with the quotation.
Two colours, cap on and off
The same 60 mL PET body in clear and in amber — front, opening, cap set aside, and the dimension chart for each colour.
The cap is matched to the neck
This bottle takes the white tamper-evident cap with an inner plug on its 27 mm neck — the ring breaks on first opening and the plug seals the mouth.
White tamper-evident cap with inner plug
The bottle is supplied with the white tamper-evident cap matched to the 27 mm neck; the inner plug sits inside the mouth to seal the fill. The 27 mm thread is not interchangeable with the 14 mm and 23 mm necks on the smaller bottles in the range.
Label beside the moulded scale
Decoration for this item is labelling. The moulded scale runs up one side of the body, so the label panel is set per project and proofed before the first production run.
This bottle, answered
Which colours are available?
Clear and amber. Amber is the usual choice for fragrance and flavour fills; other shades are a project question.
What are the bottle dimensions?
40 mm across the body and 102 mm high, on a 27 mm neck. The empty bottle weighs 15 ± 2 g.
What can be filled in it?
Liquid flavours and fragrances, and sample volumes. Send us the fill and we confirm the closure against it.
Which cap fits this neck?
The white tamper-evident cap with an inner plug, made for the 27 mm neck.
How does it differ from the 30 mL bottle?
Twice the fill on a wider body: 60 mL against 30 mL, 40 × 102 mm against 30.2 × 67.3 mm, 15 ± 2 g against 7 g, and a 27 mm neck against 23 mm.
Is PET heat-resistant?
This bottle is rated to 55 °C, lower than the HDPE formats in our range. It is not intended for hot fills; tell us the filling temperature at the enquiry stage.
