30 mL E-Liquid Bottle
A 30 mL PET e-liquid bottle at 7 g, in clear or black, with a 23 mm neck and the matching cone-tip cap. Used for e-liquid fills and sample volumes, and decorated with a body label.
Specification
The body measures 30.2 mm across and stands 67.3 mm high, on a 23 mm neck. It is supplied in clear or black, either of which shows the fill through the wall.
| Product name | 30 mL E-Liquid Bottle |
|---|---|
| Capacity | 30 mL |
| Weight | 7 g |
| Neck size | 23 mm |
| Bottle dimensions | 30.2 (φ) × 67.3 (H) mm |
| Material | PET |
| Colour | Clear / black |
| Decoration | Labelling |
| Temperature resistance | ≤ 55 °C |
| Compatible cap | E-liquid bottle cap |
Where it is used
- E-liquids
- Samples
Weight is quoted as 7 g per bottle. Dimensions are the moulded figures for this bottle; a tolerance drawing is issued with the quotation.
Two colours, cap on and off
The same 30 mL PET body in clear and in black — assembled, with the cap separated, and as a dimension chart.
The cap is matched to the neck
This bottle takes the e-liquid bottle cap on its 23 mm neck — the cone-tip cap shown in the photos, in a matching clear or black finish.
E-liquid bottle cap
The bottle is supplied with the e-liquid bottle cap matched to the 23 mm neck; both the cap and the body follow the colour you order. The 23 mm thread is not interchangeable with the 14 mm neck on the 10 mL bottle, so check the neck before you reorder caps.
Label on the clear or black body
Decoration for this item is labelling. The panel is sized for the 30 mL body, so artwork is set per project and proofed before the first production run.
This bottle, answered
Which colours are available?
Clear and black, with cap and body in the same colour. Other shades are a project question — send us the colour you need.
What are the bottle dimensions?
30.2 mm across the body and 67.3 mm high, on a 23 mm neck. The empty bottle weighs 7 g.
What can be filled in it?
E-liquids and sample volumes. Send us the fill and we confirm the closure against it.
Which cap fits this neck?
The e-liquid bottle cap, made for the 23 mm neck. The cap on the 10 mL bottle runs a 14 mm thread and does not fit this one.
How does it differ from the 10 mL bottle?
Three times the fill on a larger body: 30 mL against 10 mL, 30.2 × 67.3 mm against 21.3 × 52.6 mm, 7 g against 3 g, and a 23 mm neck against 14 mm.
Is PET heat-resistant?
This bottle is rated to 55 °C, lower than the HDPE formats in our range. It is not intended for hot fills; tell us the filling temperature at the enquiry stage.
