Custom & Standard Products
Custom moulded packaging in PET, HDPE, PP, PS and LDPE, alongside standard PET bottles 10–120 mL and standard PE bottles 250 mL–2.5 L.
Specification
Three ways to buy: build a new mould around your sketch, take a standard PET bottle for smaller fills, or use a standard PE bottle where a larger volume is needed. Standard sizes ship from stock tooling; custom projects run through sampling, tooling and a pilot run.
| Custom material | PET / HDPE / PP / PS / LDPE |
|---|---|
| Custom colour | White / black / transparent / frosted transparent / amber / translucent colours / custom |
| Custom decoration | Silkscreen / hot stamping / spray coating / label / electroplating |
Colours, decoration and closures are combined per project; the catalogue figures are the starting point for a quotation, not a stock list.
Custom, standard PET, standard PE
Dimensions from the catalogue
| Capacity | Body Ø / width | Overall height | Neck Ø |
|---|---|---|---|
| 250 mL | Ø62.5 mm | 123.3 mm | Ø41.5 mm |
| 500 mL | Ø69 mm | 184 mm | Ø36.9 mm |
| 600 mL | Ø69 mm | 185.5 mm | Ø41.5 mm |
| 1 L - A | Ø86 mm | 229.5 mm | Ø36.9 mm |
| 1 L - B | Ø93 mm | 215 mm | Ø41.5 mm |
| 1.2 L | Ø95 mm | 230 mm | Ø41.5 mm |
| 1.2 L (slim) | 141 × 84 mm | 160.5 mm | — |
| 2 L | 144 × 93.5 mm | 219 mm | — |
| 2.5 L | 161 × 100 mm | 242.5 mm | — |
Dimensions are nominal and taken from the printed catalogue; confirm with a drawing before ordering.
Six capacities, sprayers and droppers
10, 15, 30, 60, 110 and 120 mL in transparent and amber PET. Sprayer, dropper and screw-cap necks are available on the same bodies.