60 mL Cold Storage Rod
A 60 mL cold storage rod with a slim round body, 25.0 mm across and 154.0 mm high, used frozen in lunch bags and insulated tumblers. The body size is fixed; resin, colour, plug and fill are agreed against your drawing.
Specification
The body measures 25.0 mm across and 154.0 mm high — slim enough to drop into a bottle-shaped pocket in a lunch bag or a tumbler. This is a custom item, so the drawing sets the size: resin, colour, plug and fill are settled per project rather than listed as fixed figures.
| Product name | 60 mL Cold Storage Rod |
|---|---|
| Capacity | 60 mL |
| Bottle dimensions | 25.0 (φ) × 154.0 (H) mm |
| Weight | Confirmed per project |
| Material | Confirmed per project |
| Colour | Confirmed per project |
| Decoration | Confirmed per project |
| Temperature resistance | Confirmed per project |
| Compatible cap | Confirmed per project |
Where it is used
- Lunch bags
- Insulated tumblers
- Food and beverage
The size on this page comes from the drawing supplied with the enquiry. Every other line is quoted against that drawing, so send the fill, the target market and the volume you need.
Rod, drawing and use
The same 60 mL rod photographed from the side, beside the 220 mL rod, stacked, in a lunch bag and a tumbler, and as a dimension chart.
What the drawing fixes, what the project decides
The body geometry is set by the mould; the rest of the sheet is filled in with you.
Body and plug
The 25.0 × 154.0 mm slim body and the small screw plug at the top are what this tool makes, so the footprint you see is the footprint you get.
Resin, colour, plug, fill
Weight, resin grade, colour, the screw plug and the label are quoted against the drawing — send your spec and we answer line by line.
This rod, answered
What size is the rod?
25.0 mm across and 154.0 mm high — a 60 mL body. The drawing on this page is the one the tooling is built to.
How is it used?
Frozen and dropped into a lunch bag or an insulated tumbler to hold the temperature of the food or drink. The scene photos show both.
Which parts are custom?
Resin grade, colour, the screw plug and the fill volume are agreed against your drawing and quoted together.
Is there a larger size?
Yes — a 220 mL flat rod at 51.5 × 160.0 mm, shown on its own page. The two are often used together in one cooler.
How does a custom order start?
With a drawing, a sample or a target size. We come back with a tooling route, a sample plan and a quotation; the process is set out on the custom & production page.
